{"id":53,"date":"2018-09-26T08:48:33","date_gmt":"2018-09-26T08:48:33","guid":{"rendered":"https:\/\/ota-abrasivos.com\/en\/menu\/"},"modified":"2022-10-17T17:28:41","modified_gmt":"2022-10-17T17:28:41","slug":"menu","status":"publish","type":"page","link":"https:\/\/ota-abrasivos.com\/en\/menu\/","title":{"rendered":"_Products"},"content":{"rendered":"\n
<\/div>
\n
\"\"\/<\/div><\/div><\/div>

Products<\/h1><\/div>

Click here to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.<\/p><\/div><\/div><\/div><\/div><\/div>\n\n\n\n

<\/p>\n<\/div><\/section>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n

PRODUCTS
Rolls<\/a>
Sheets<\/a>
Belts<\/a>
Wide Belts<\/a>
Flexible Abrasive Discs<\/a>
Double Face Discs<\/a>
Naumkeag Caps
Fibre Discs<\/a>
Flap Discs<\/a><\/p>\n<\/div><\/div>\n\n\n\n

<\/div>
\n

Flap Wheels<\/a>
Compact Discs<\/a>
Mesh Discs<\/a>
Cleaning Discs<\/a>
Cut & Grinding Discs<\/a>
Foam Abrasive Blocks & Pads<\/a>
Flexible Micro Abrasives<\/a>
<\/a>Non-Woven Abrasives<\/a>
Elastic Compact Abrasives
<\/a>Felts<\/a>
Other Products<\/a><\/p>\n<\/div><\/div>\n\n\n\n

<\/div>
\n

ACCESSORIES
Fibre Discs Backing Pads
Backing Pads for Vel and SCM Discs
<\/a>Backing Pads for DA Sanders (Vel)
Save & Soft Interface Pads<\/a>
Other Accessories<\/a><\/p>\n\n\n\n

<\/p>\n<\/div><\/div>\n<\/div><\/section>\n\n\n\n

<\/p>\n<\/div><\/section>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/figure>\n\n\n\n

Rolls<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Widths (mm)<\/p><\/div><\/div><\/td>

10 a 1650<\/p><\/div><\/div><\/td><\/tr>

Lengths (m)<\/p><\/div><\/div><\/td>

25 a 100<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC) \/\/ Zirconium (Z) \/\/ Ceramic (Cer)<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

P16 to P5000 and equivalents<\/p><\/div><\/div><\/td><\/tr>

Backing<\/p><\/div><\/div><\/td>

Papers: A to F
Cloths: cotton, polyester, polycotton, combination \/\/ JFF to Z
Film
Non-woven abrasives
<\/p><\/div><\/div><\/td><\/tr>

Back Finishing<\/p><\/div><\/div><\/td>

Vel, foam, adhesive<\/p><\/div><\/div><\/td><\/tr>

Aplications<\/p><\/div><\/div><\/td>

Wood and lacquers \/\/ Metals \/\/ Plastic \/\/ Glass \/\/ Stone \/\/ Automotive (paint & repair)
<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n\n\n\n

<\/div>
\n
\"\"<\/figure>\n\n\n\n

Sheets<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Widths (mm)<\/p><\/div><\/div><\/td>

Free (standard 230)<\/p><\/div><\/div><\/td><\/tr>

Lengths (m)<\/p><\/div><\/div><\/td>

Free (standard 280)<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC) \/\/ Zirconium (Z) \/\/ Ceramic (Cer)<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

P16 to P5000 and equivalents<\/p><\/div><\/div><\/td><\/tr>

Backing<\/p><\/div><\/div><\/td>

Papers: A to F
Cloths: coton \/\/ JF to X<\/p><\/div><\/div><\/td><\/tr>

Back finishing<\/p><\/div><\/div><\/td>

Vel, foam, adhesive<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Wood \/\/ Metals \/\/ Plastic \/\/ Automotive (paint & repair)<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n<\/div><\/section>\n\n\n\n

<\/p>\n<\/div><\/section>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/figure>\n\n\n\n

Belts<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Widths (mm)<\/p><\/div><\/div><\/td>

6 to 300<\/p><\/div><\/div><\/td><\/tr>

Lengths (m)<\/p><\/div><\/div><\/td>

140 to 10500<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC) \/\/ Zirconium (Z) \/\/ Ceramic (Cer)<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

P16 to P3000 and equivalents<\/p><\/div><\/div><\/td><\/tr>

Backing<\/p><\/div><\/div><\/td>

Papers: A to F
Cloths: cotton, polyester, polycotton, combination \/\/ JFF to YY
Film
Non-woven abrasives<\/p><\/div><\/div><\/td><\/tr>

Back Finishing<\/p><\/div><\/div><\/td>

Vel (rarely)<\/p><\/div><\/div><\/td><\/tr>

Joints<\/p><\/div><\/div><\/td>

Overlap \/\/ Straight film (TT) \/\/ Reverse straight film (TTR)<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Wood and lacquers \/\/ Metals \/\/ Plastic \/\/ Glass \/\/ Stone \/\/ Automotive (paint & repair)<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n\n\n\n

<\/div>
\n
\"\"<\/figure>\n\n\n\n

Wide Belts<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Widths (mm)<\/p><\/div><\/div><\/td>

600 to 1650<\/p><\/div><\/div><\/td><\/tr>

Lenghts (mm)<\/p><\/div><\/div><\/td>

No limits, generally up to 3250<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC) \/\/ Zirconium (Z) \/\/ Ceramic (Cer)<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

P40 to P1000<\/p><\/div><\/div><\/td><\/tr>

Backing<\/p><\/div><\/div><\/td>

Papers: D a F
Cloths: cotton, polyester, polycotton, combination \/\/ JFF to YY<\/p><\/div><\/div><\/td><\/tr>

Joints<\/p><\/div><\/div><\/td>

Overlap \/\/ Straight film (TT) \/\/ Reverse straight film (TTR)<\/p><\/div><\/div><\/td><\/tr>

Aplicações<\/p><\/div><\/div><\/td>

Wood and lacquers \/\/ Hard and soft metals<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n<\/div><\/section>\n\n\n\n

<\/p>\n<\/div><\/section>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/figure>\n\n\n\n

Flexible Abrasive Discs<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Diameters (mm)<\/p><\/div><\/div><\/td>

28 to 600<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC) \/\/ Zirconium (Z) \/\/ Ceramic (Cer)<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

P16 to P5000 and equivalents<\/p><\/div><\/div><\/td><\/tr>

Holes<\/p><\/div><\/div><\/td>

Most common: 6+1 \/\/ 8 \/\/ 8+1 \/\/ 15 \/\/ 17 \/\/ 49<\/p><\/div><\/div><\/td><\/tr>

Backing<\/p><\/div><\/div><\/td>

Papers: A to F
Cloths: cotton, polyester, polycotton, combination \/\/ JF to YY
Film
Non-woven abrasives
<\/p><\/div><\/div><\/td><\/tr>

Back Finishing<\/p><\/div><\/div><\/td>

Vel, foam, adhesive, reinforcements, combinations<\/p><\/div><\/div><\/td><\/tr>

Aplicações<\/p><\/div><\/div><\/td>

Wood and lacquers \/\/ Hard and soft metals \/\/ Plastic \/\/ Glass \/\/ Stone \/\/ Automotive (paint & repair) \/\/ Aeronautics \/\/ General & Precision Polishing<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n\n\n\n

<\/div>
\n
\"\"<\/figure>\n\n\n\n

Double Face Discs<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Diameters (mm)<\/p><\/div><\/div><\/td>

400 to 435<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC)<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

P16 to P150<\/p><\/div><\/div><\/td><\/tr>

Backing<\/p><\/div><\/div><\/td>

Papers: E to F
Cloths: cotton, polyester, polycotton \/\/ X<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Wood floors \/\/ Stone and similar (screeds)<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n<\/div><\/section>\n\n\n\n

<\/p>\n<\/div><\/section>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/figure>\n\n\n\n

Naumkeag Caps<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Diameters (mm)<\/p><\/div><\/div><\/td>

83 to 105<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC)<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

P40 to P220<\/p><\/div><\/div><\/td><\/tr>

Backing<\/p><\/div><\/div><\/td>

Cloths: cotton \/\/ F to X<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Footwear industry<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n\n\n\n

<\/div>
\n
\"\"<\/figure>\n\n\n\n

Fibre Discs<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Diameters (mm)<\/p><\/div><\/div><\/td>

Standard: 100 \/\/ 115 \/\/ 125 \/\/ 150 \/\/ 180 \/\/ 230<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC) \/\/ Zirconium (Z) \/\/ Ceramic (Cer)<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

P16 to P400<\/p><\/div><\/div><\/td><\/tr>

Holes<\/p><\/div><\/div><\/td>

4, 8 and 6 slits, simple and deppressed<\/p><\/div><\/div><\/td><\/tr>

Backing<\/p><\/div><\/div><\/td>

Fibre (6 to 8 mm)<\/p><\/div><\/div><\/td><\/tr>

Max. Rotation<\/p><\/div><\/div><\/td>

Max. peripheral speed: 80 m\/s
Ø100 (15300 rpm) \/\/ Ø115 (13300 rpm) \/\/ Ø125 (12250 rpm) \/\/ Ø150 (10200 rpm) \/\/ Ø180 (8500 rpm) \/\/ Ø230 (6650 rpm)<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Wood \/\/ Hard and soft metals \/\/ Stone \/\/ Automotive<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n<\/div><\/section>\n\n\n\n

<\/p>\n<\/div><\/section>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/figure>\n\n\n\n

Flap Discs<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Diameters (mm)<\/p><\/div><\/div><\/td>

Standard: 115 \/\/ 125 \/\/ 150 \/\/ 180<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC) \/\/ Zirconium (Z) \/\/ Ceramic (Cer)<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

P36 to P120 \/\/ Others<\/p><\/div><\/div><\/td><\/tr>

Hole<\/p><\/div><\/div><\/td>

22 mm<\/p><\/div><\/div><\/td><\/tr>

Backing<\/p><\/div><\/div><\/td>

Fibre \/\/ Plastic<\/p><\/div><\/div><\/td><\/tr>

Fomat<\/p><\/div><\/div><\/td>

Conical (29) 
<\/p><\/div><\/div>

<\/a> <\/div><\/div>

Flat (27)<\/p><\/div><\/div>

<\/a> <\/div><\/div><\/td><\/tr>

Max. Rotation<\/p><\/div><\/div><\/td>

Max peripheral speed: 80 m\/s
Ø100 (15300 rpm) \/\/ Ø115 (13300 rpm) \/\/ Ø125 (12250 rpm) \/\/ Ø150 (10200 rpm) \/\/ Ø180 (8500 rpm)<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Hard and soft metals \/\/ Glass \/\/ Automotive (repair)<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n\n\n\n

<\/div>
\n
\"\"<\/figure>\n\n\n\n

Flap Wheels<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Formats & dimensions (mm)<\/p><\/div><\/div><\/td>

Spindle\/Shaft:: 22*10 to 80*50 \/\/ Pin: 3 or 6
Flange: 100*20 to 400*100 \/\/ Hole: 10 \/\/ 16 \/\/ 19.2 \/\/ 20 \/\/ 25 \/\/ 30 \/\/ 54 \/\/ 100 \/\/ 170
Satinex<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

40 to 400 \/\/ Coarse, Medium, Fine, Very Fine<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC) \/\/ Zirconium (Z) \/\/ Ceramic (Cer)
Non-woven abrasives (NWA)
Mixed: Cloth + NWA and coated abrasives combinations<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Metals \/\/ Wood \/\/ Glass \/\/ Automotive (repair)<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n<\/div><\/section>\n\n\n\n

<\/p>\n<\/div><\/section>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/figure>\n\n\n\n

Compact Discs<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Diameters (mm)<\/p><\/div><\/div><\/td>

110 to 152<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC) \/\/ Zirconium (Z)<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

Medium \/\/ Fine \/\/ Super Fine<\/p><\/div><\/div><\/td><\/tr>

Hole (mm)<\/p><\/div><\/div><\/td>

22<\/p><\/div><\/div><\/td><\/tr>

Backing<\/p><\/div><\/div><\/td>

Fibre<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Metals<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n\n\n\n

<\/div>
\n
\"\"<\/figure>\n\n\n\n

Mesh Discs<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Diameters (mm)<\/p><\/div><\/div><\/td>

406<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Silicon Carbide (SiC)<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

P60 to P220<\/p><\/div><\/div><\/td><\/tr>

Backing<\/p><\/div><\/div><\/td>

Polyester mesh<\/p><\/div><\/div><\/td><\/tr>

Application<\/p><\/div><\/div><\/td>

Regularization of wooden floors<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n<\/div><\/section>\n\n\n\n

<\/p>\n<\/div><\/section>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/figure>\n\n\n\n

Cleaning Discs<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Diameters (mm)<\/p><\/div><\/div><\/td>

406<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

By color: red \/\/ white \/\/ black \/\/ green \/\/ blue \/\/ brown \/\/ beige<\/p><\/div><\/div><\/td><\/tr>

Application<\/p><\/div><\/div><\/td>

Floor cleaning<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n\n\n\n

<\/div>
\n
\"\"<\/figure>\n\n\n\n

Cut & Grinding Discs<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Diameters (mm)<\/p><\/div><\/div><\/td>

Standard: 115 \/\/ 125 \/\/ 180 \/\/ 230<\/p><\/div><\/div><\/td><\/tr>

Thickenss (mm)<\/p><\/div><\/div><\/td>

Cut = f (Ø): 0.8 a 4
Grinding: 4 a 8 <\/p><\/div><\/div><\/td><\/tr>

Formato<\/p><\/div><\/div><\/td>

Cut: flat centre (T41), depressed centre (T42)
Ginding: depressed centre (T27)<\/p><\/div><\/div>

<\/a> <\/div><\/div><\/td><\/tr>

Abrasivos<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC) \/\/ Zirconium (Z)<\/p><\/div><\/div><\/td><\/tr>

Hardness<\/p><\/div><\/div><\/td>

Medium: N, O, P
Hard: P, Q, R, S
Very Hard: T, U, V, W<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

Coarse: 8 \/\/ 10 \/\/ 12 \/\/ 14 \/\/ 16 \/\/ 20 \/\/ 24
Medium: 30 \/\/ 36 \/\/ 46 \/\/ 54 \/\/ 60
Fine: 80 \/\/ 100<\/p><\/div><\/div><\/td><\/tr>

Max. Rotation<\/p><\/div><\/div><\/td>

Max. peripheral speed: 80 m\/s
Ø100 (15300 rpm)\/\/ Ø115 (13300 rpm) \/\/ Ø125 (12250 rpm) \/\/ Ø150 (10200 rpm) \/\/ Ø180 (8500 rpm)<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Metals (inox and others) \/\/ Stone<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n<\/div><\/section>\n\n\n\n

<\/p>\n<\/div><\/section>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/figure>\n\n\n\n

Foam Abrasive
Blocks & Pads<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Formats and domensions (mm)<\/p><\/div><\/div><\/td>

Blocks: 98*69*26
Flex Double Face Sponges:120*98*13
Sanding Pads: 115*140*5
<\/p><\/div><\/div><\/td><\/tr>

Abrasivos<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC) \/\/ Ceramic (Cer)<\/p><\/div><\/div><\/td><\/tr>

Hardness<\/p><\/div><\/div><\/td>

Blocks: medium, hard
Sponges and pads: medium, soft<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

Coarse \/\/ Medium \/\/ Fine \/\/ Super Fine \/\/ Ultra Fine (please refer to equivalence tables)<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Wood finishing \/\/ Stone & Composites \/\/ Automotive (paint & repair) \/\/ Aeronautics
<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n\n\n\n

<\/div>
\n
\"\"<\/figure>\n\n\n\n

Flexible
Micro Abrasives<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Formats<\/p><\/div><\/div><\/td>

Rolls\/\/ Belts \/\/ Discs \/\/ Sheets<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC) \/\/ Silicon Dioxide \/\/ Diamant
<\/p><\/div><\/div><\/td><\/tr>

Grits (standard)<\/p><\/div><\/div><\/td>

0.01 µ to 100 µ<\/p><\/div><\/div><\/td><\/tr>

Backing<\/p><\/div><\/div><\/td>

Film 75 µ to 125 µ<\/p><\/div><\/div><\/td><\/tr>

Back Finishing<\/p><\/div><\/div><\/td>

Adhesive<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Precision polishing: Metals \/\/ Composites \/\/ Ceramic \/\/ Glass<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n<\/div><\/section>\n\n\n\n

<\/p>\n<\/div><\/section>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/figure>\n\n\n\n

Non-Woven Abrasives<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Standard Formats & Dimensions (mm)<\/p><\/div><\/div><\/td>

Belts: from 6 to 1270 (width) \/\/ from 435 to 3250 (length)
Discs: 80 a 200<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC)<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

Coarse \/\/ Medium \/\/ Fine \/\/ Very Fine \/\/ Super Fine \/\/ Ultra Fine (ver tabela de equivalências)
<\/p><\/div><\/div><\/td><\/tr>

Joints (belts)<\/p><\/div><\/div><\/td>

Straight film<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Final finishing on all types of tubes, handles, preparation of products for painting, etc.
Materials: all types of metal<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n\n\n\n

<\/div>
\n
\"\"<\/figure>\n\n\n\n

Elastic Bonded Abrasives<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Special features<\/p><\/div><\/div><\/td>

Abrasive grains surrounded by an elastic binder<\/p><\/div><\/div><\/td><\/tr>

Standard formats<\/p><\/div><\/div><\/td>

Wheels \/\/ Polydiscs \/\/ Mounted Points \/\/ Blocks<\/p><\/div><\/div><\/td><\/tr>

Abrasives<\/p><\/div><\/div><\/td>

Aluminium Oxide (AO) \/\/ Silicon Carbide (SiC)<\/p><\/div><\/div><\/td><\/tr>

Grits<\/p><\/div><\/div><\/td>

F24 to F800<\/p><\/div><\/div><\/td><\/tr>

Binders<\/p><\/div><\/div><\/td>

Hard and Elastic Polyurethane \/\/ Rubbers<\/p><\/div><\/div><\/td><\/tr>

Hardness<\/p><\/div><\/div><\/td>

Hard \/\/ Medium \/\/ Soft<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Aeronautics \/\/ Automotive \/\/ Electronics \/\/ Dental \/\/ Food \/\/ Medicine \/\/ Musical Instruments \/\/ Printing \/\/ Saw blades \/\/ Tools \/\/ Watchmaking and Jewelery
Surface roughness: Rz <1.0 µm<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n<\/div><\/section>\n\n\n\n

<\/p>\n<\/div><\/section>\n\n\n\n

\u00ad<\/p>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/figure>\n\n\n\n

Felts<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Formats & Dimensions (mm)<\/p><\/div><\/div><\/td>

Discs (Ø): 150 to 300 
Plates: 400 * 400<\/p><\/div><\/div><\/td><\/tr>

Thickness (mm)<\/p><\/div><\/div><\/td>

10 \/\/ 20 \/\/ 30 \/\/ 40 \/\/ 50<\/p><\/div><\/div><\/td><\/tr>

Holes (mm)<\/p><\/div><\/div><\/td>

0 \/\/ 25<\/p><\/div><\/div><\/td><\/tr>

Density (g\/cm3)<\/p><\/div><\/div><\/td>

0.44 \/\/ 0.48 \/\/ 0.52 \/\/ 0.62 \/\/ 0.72 \/\/ 0.82<\/p><\/div><\/div><\/td><\/tr>

Special features<\/p><\/div><\/div><\/td>

Standard \/\/ Carbonized<\/p><\/div><\/div><\/td><\/tr>

Application<\/p><\/div><\/div><\/td>

Polishing<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n\n\n\n

<\/div>
\n

OTHER
PRODUCTS<\/h4><\/div>
<\/div><\/div>


Spirabands
Cotton folded buffs: undulated (W), ventilated, pleated, mixed
Cotton polishing discs and wipes<\/p><\/div><\/div><\/div><\/div><\/div>\n<\/div><\/div>\n<\/div><\/section>\n\n\n\n

<\/p>\n<\/div><\/section>\n\n\n\n

<\/div>
\n

Accessories<\/h3>

<\/p><\/div>\n<\/div><\/section>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/figure>\n\n\n\n

Fibre Discs
Pads<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Diameters (mm)<\/p><\/div><\/div><\/td>

100 \/\/ 115 \/\/ 125 \/\/ 180 \/\/ 230<\/p><\/div><\/div><\/td><\/tr>

Models<\/p><\/div><\/div><\/td>

Standard \/\/ Turbo I \/\/ Turbo II<\/p><\/div><\/div><\/td><\/tr>

Hardeness<\/p><\/div><\/div><\/td>

Soft \/\/ Medium \/\/ Hard \/\/ Hard+<\/p><\/div><\/div><\/td><\/tr>

Colors<\/p><\/div><\/div><\/td>

Black \/\/ White<\/p><\/div><\/div><\/td><\/tr>

Application<\/p><\/div><\/div><\/td>

Fibre discs support<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n\n\n\n

<\/div>
\n
\"\"<\/figure>\n\n\n\n

Backing Pads for
Vel & SCM Discs<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Diameters (mm)<\/p><\/div><\/div><\/td>

100 \/\/ 115 \/\/ 125 \/\/ 150 \/\/ 180 \/\/ 200
<\/p><\/div><\/div><\/td><\/tr>

Damping thickness (mm)<\/p><\/div><\/div><\/td>

0 \/\/ 3 \/\/ 12 \/\/ 18 \/\/ 20 \/\/ 24<\/p><\/div><\/div><\/td><\/tr>

Holes<\/p><\/div><\/div><\/td>

No<\/p><\/div><\/div><\/td><\/tr>

Fixing<\/p><\/div><\/div><\/td>

M14x2, 5\/8”-11<\/p><\/div><\/div><\/td><\/tr>

Apploications<\/p><\/div><\/div><\/td>

Support for: flexible abrasive Vel discs \/\/ SCM discs<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n<\/div><\/section>\n<\/div><\/section>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/figure>\n\n\n\n

Backing Pads
for DA Sanders (Vel)<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Diameters (mm)<\/p><\/div><\/div><\/td>

125 \/\/ 150<\/p><\/div><\/div><\/td><\/tr>

Thickness (mm)<\/p><\/div><\/div><\/td>

8 \/\/ 12 \/\/ 14 \/\/ 17<\/p><\/div><\/div><\/td><\/tr>

Holes<\/p><\/div><\/div><\/td>

0 \/\/ 5 \/\/ 6 \/\/ 6+1 \/\/ 8 \/\/ 8+1 \/\/ 15 \/\/ 17 \/\/ 20 \/\/ 24 \/\/ 55<\/p><\/div><\/div><\/td><\/tr>

Hardness<\/p><\/div><\/div><\/td>

Soft \/\/ Medium \/\/ Hard<\/p><\/div><\/div><\/td><\/tr>

Fixing<\/p><\/div><\/div><\/td>

M8 \/\/ 5\/16” \/\/ Bosch®, Festo®, Makita® tools<\/p><\/div><\/div><\/td><\/tr>

Application<\/p><\/div><\/div><\/td>

Support for flexible abrasive Vel discs, with suction<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n\n\n\n

<\/div>
\n
\"\"<\/figure>\n\n\n\n

Save & Soft
Interface Pads<\/h4><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n

Diameters (mm)<\/p><\/div><\/div><\/td>

100 \/\/ 115 \/\/ 125 \/\/ 150 \/\/ 180 \/\/ 200<\/p><\/div><\/div><\/td><\/tr>

Thickness (mm)<\/p><\/div><\/div><\/td>

3 \/\/ 4 \/\/ 5 \/\/ 10<\/p><\/div><\/div><\/td><\/tr>

Holes<\/p><\/div><\/div><\/td>

Same as pads<\/p><\/div><\/div><\/td><\/tr>

Hardness<\/p><\/div><\/div><\/td>

Soft \/\/ Medium \/\/ Hard<\/p><\/div><\/div><\/td><\/tr>

Hook Strength<\/p><\/div><\/div><\/td>

Soft \/\/ Hard \/\/ Hard+<\/p><\/div><\/div><\/td><\/tr>

Applications<\/p><\/div><\/div><\/td>

Pad protection or damping adjustment for applications with flexible abrasive Vel discs<\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table><\/div><\/div>\n\n<\/div><\/div>\n<\/div><\/section>\n<\/div><\/section>\n\n\n\n

<\/div>
\n
<\/div>
\n
<\/div>
\n

OTHER
ACCESSORIES<\/h4><\/div>
<\/div><\/div>


Foam Pads
Spray Adhesive Glues
Solid and Liquid Abrasive Polishing Pastes
Sanding and Polishing Hand Tools<\/p><\/div><\/div><\/div><\/div><\/div>\n<\/div><\/div>\n\n\n\n

<\/div>
<\/div><\/div>\n<\/div><\/section>\n<\/div><\/section>\n\n\n\n
<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/figure><\/div>\n<\/div><\/div>\n\n\n\n
<\/div>
\n
\"\"\/<\/div><\/div><\/div>
Rua Ant\u00f3nio Silva Marinho, 157
4100-064 Porto – Portugal<\/span><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n\n
\"\"\/<\/div><\/div><\/div>
(+351) 226 178 423
(+351) 226 178 443<\/span><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n\n
\"\"\/<\/div><\/div><\/div>
geral@ota-abrasivos.pt<\/a><\/span><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n\n

<\/p>\n<\/div><\/div>\n\n\n\n

<\/div>
\n

Follow us<\/h3><\/div>
<\/div><\/div><\/div><\/div><\/div>\n\n\n\n
<\/div>
\n
<\/div>
\n
<\/div>
\n
<\/div>
\n
\"\"<\/a>
50<\/figcaption><\/figure>\n\n\n\n

<\/p>\n<\/div><\/div>\n\n\n\n

<\/div>
\n
\"\"<\/a><\/figure>\n<\/div><\/div>\n<\/div><\/section>\n<\/div><\/div>\n<\/div><\/section>\n\n\n\n

<\/p>\n<\/div><\/div>\n<\/div><\/section>\n<\/div><\/section>\n","protected":false},"excerpt":{"rendered":"

\u00ad<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_uag_custom_page_level_css":"","advgb_blocks_editor_width":"","advgb_blocks_columns_visual_guide":""},"uagb_featured_image_src":{"full":false,"thumbnail":false,"medium":false,"medium_large":false,"large":false,"1536x1536":false,"2048x2048":false},"uagb_author_info":{"display_name":"filipeota","author_link":"https:\/\/ota-abrasivos.com\/en\/author\/filipeota\/"},"uagb_comment_info":0,"uagb_excerpt":"\u00ad","coauthors":[],"author_meta":{"author_link":"https:\/\/ota-abrasivos.com\/en\/author\/filipeota\/","display_name":"filipeota"},"relative_dates":{"created":"Posted 8 anos ago","modified":"Updated 4 anos ago"},"absolute_dates":{"created":"Posted on Setembro 26, 2018","modified":"Updated on Outubro 17, 2022"},"absolute_dates_time":{"created":"Posted on Setembro 26, 2018 8:48 am","modified":"Updated on Outubro 17, 2022 5:28 pm"},"featured_img_caption":"","featured_img":false,"series_order":"","_links":{"self":[{"href":"https:\/\/ota-abrasivos.com\/en\/wp-json\/wp\/v2\/pages\/53"}],"collection":[{"href":"https:\/\/ota-abrasivos.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/ota-abrasivos.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/ota-abrasivos.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ota-abrasivos.com\/en\/wp-json\/wp\/v2\/comments?post=53"}],"version-history":[{"count":205,"href":"https:\/\/ota-abrasivos.com\/en\/wp-json\/wp\/v2\/pages\/53\/revisions"}],"predecessor-version":[{"id":2665,"href":"https:\/\/ota-abrasivos.com\/en\/wp-json\/wp\/v2\/pages\/53\/revisions\/2665"}],"wp:attachment":[{"href":"https:\/\/ota-abrasivos.com\/en\/wp-json\/wp\/v2\/media?parent=53"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}